水墨印刷机在纸箱包装机械中常被使用，下面大家讲讲水墨印刷机的使用技巧，供大家参考。

通过背面曝光可设置基层，以获得所需的浮雕，并增强聚酯支撑膜和感光性树脂层的粘合性。正确的背部暴露从聚酯支撑膜方向暴露，可以在洗涤过程中保护好的图案，并防止倒塌的救济。

曝光后应立即进行曝光，主要是因为摄影活动会逐渐消失，造成曝光时间较长，曝光量和曝光量差。

当树脂板层保证撕裂时，感光版的感光度迅速衰减，应立即将胶片放置在板内或在10分钟内曝光，以便   好的效果。

主曝光时间可以由主曝光试验确定，感光性树脂通过聚合成不溶性，一个印版就可以再现胶片上的精细图案。要将空气释放到手擦真空膜和密封负面版本的主要暴露前。

板材   要干燥，否则会影响板材的厚度均匀性，干燥时，水墨印刷机不要让印刷版面和其他表面接触，不要用手指接触印刷表面，否则会留下痕迹。但在去坚持之前，   要删除任何斑点的表面上的板。要坚持，要清理后面的树脂版剩下的斑点，如果你不清理这些东西，会影响板的厚度均匀性和胶带。

Ink printing machine is often used in carton packaging machinery. Let's talk about the use skills of ink printing machine for your reference.

The base layer can be set through back exposure to obtain the required relief and enhance the adhesion of polyester support film and photosensitive resin layer. The correct back exposure from the direction of the polyester support film can protect the pattern during washing and prevent collapse relief.

Exposure should be carried out immediately after exposure, mainly because photography activities will gradually disappear, resulting in long exposure time, poor exposure and exposure.

When the resin plate ensures tearing, the sensitivity of the photosensitive plate will decay rapidly, and the film shall be placed in the plate or exposed within 10 minutes immediately for good effect.

The main exposure time can be determined by the main exposure test. The photosensitive resin can be polymerized into insoluble, and the fine pattern on the film can be reproduced in one plate. To release air to hand wipe the vacuum film and seal the negative version of the main exposure before.

The plate should be dry, otherwise it will affect the thickness uniformity of the plate. When drying, the ink printer should not let the printing plate contact with other surfaces, and should not touch the printing surface with fingers, otherwise it will leave traces. But before going to stick, remove any spots on the surface of the board. Insist on cleaning the remaining spots of the resin plate at the back. If you don't clean these things, it will affect the thickness uniformity of the board and the tape.